A customer using the LAUNCH CRT-511E TPMS diagnostic tool reported that none of the four Launch Launch TSENSOR-05S TPMS sensors could be detected or recognized by the device.
The customer wanted to confirm whether the sensors were compatible with the CRT-511E, whether a specific activation or programming procedure was required, and whether the sensors might be defective.
Launch i-TPMS, CRT5011E, TPMS 5011 V2 these TPMS tool use with TSENSOR-05S sensors no limit, please do not worry.

Solution: Update the CRT-511E Firmware
After checking the issue, we recommended updating the LAUNCH CRT511E to the latest available firmware version.
The customer followed our advice and updated the device firmware. After the update, all four TPMS sensors were successfully detected and programmed.
Customer Feedback
The customer confirmed that everything was working perfectly:
“All 4 sensors are detected and programmed successfully.
The problem was not with the sensors, but with my Launch CRT-511E TPMS device, which had outdated firmware.
After updating the firmware to the latest version, all 4 sensors work perfectly.”
Conclusion
The issue was caused by outdated firmware on the LAUNCH CRT-511E, not by defective sensors.
If your CRT-511E cannot detect TPMS sensors, make sure your device firmware is up to date before assuming there is a problem with the sensors.





