The automotive repair industry is on the brink of a major shift. As vehicle security systems like MQB, FBS4, and CAS4+ become the standard, the tools of yesterday are no longer enough.
Today, we are thrilled to give you an exclusive first look at the LAUNCH X431 G5, a powerhouse programmer designed to redefine the boundaries of ECU cloning and anti-theft services. Coming soon to professional workshops worldwide.
Device Compatibility: The X-431 G5 is officially supported by the following Launch diagnostic platforms:
-
PAD Series: X-431 PAD V ELITE, PAD VII ELITE, PAD IX.
-
PRO Series: X-431 PRO3 V+ ELITE, X-431 PRO3S+ ELITE.
LAUNCH X431 G5 Functions:
-
Broad ECU/TCU Cloning: Supports Engine and Transmission ECU cloning for major brands including Bosch, Continental/SIEMENS, DELCO, DENSO, Marelli, ZF, GETRAG, Temic, etc., covering over 10,000 vehicle models.
-
Extensive Chip Support: Compatible with 3,000+ chip types, including encrypted chips (e.g., RH850/V850) and BMS (Battery Management System) chip read/write functions.
-
VAG Immobilizer Solutions: Comprehensive support for VW/Audi Immobilizer systems (Gen 3/4/5, MQB, etc.). Features include key adding, All-Keys-Lost (AKL), immobilizer component replacement, and engine matching. Supports MQB ELV, Audi 5th Gen BCM2 encrypted data reading/parsing, and SIMOS 18 series engine cloning.
-
BMW Immobilizer Solutions: Full support for CAS1/2/3/3+ and CAS4/4+ cloning; CAS4/4+ and FEM/BDC replacement; BMW G-chassis key matching; FRM module repair; and gearbox clearing/engine replacement.
-
Mercedes-Benz Solutions: Supports FBS3 for clearing, replacing, and cloning steering locks (ELV), ignition switches (EIS), engines, transmissions, and gearshift modules. Supports FBS4 engine and transmission cloning, including DSM/FDCT/VGS4NAG2/VGSNAG3 with “no-shell-opening” (bench mode) clearing and personalization.
-
Porsche Solutions: Supports key matching (2011–2017), front/rear ECU cloning, all types of engine/gearbox cloning, and battery repair.
-
Data Integrity: Supports Data Verification (Checksum) for engine ECUs across various brands.
-
Integrated Key Programming: Built-in key programmer hardware supporting remote generation and ID48/96 & ID46 chip cloning.
-
PC Software Integration: Features an integrated PC Clone Module for PC-based ECU cloning, offering expanded cloning functions and advanced data verification capabilities.
-
Umfassendes ECU/TCU-Cloning: Unterstützt das Klonen von Motor- und Getriebesteuergeräten führender Marken wie Bosch, Continental/SIEMENS, DELCO, DENSO, Marelli, ZF, GETRAG, Temic etc., für über 10.000 Fahrzeugmodelle.
-
Breite Chip-Unterstützung: Kompatibel mit über 3.000 Chiptypen, einschließlich verschlüsselter Chips (z. B. RH850/V850) sowie Lese-/Schreibfunktionen für BMS-Chips (Batteriemanagementsysteme).
-
VAG Wegfahrsperren-Lösungen: Umfassende Unterstützung für VW/Audi-Systeme (3./4./5. Gen, MQB etc.). Beinhaltet das Hinzufügen von Schlüsseln, “Alle Schlüssel verloren” (AKL), Austausch von Wegfahrsperren-Komponenten und Motoranpassung. Unterstützt MQB ELV, das Auslesen/Analysieren verschlüsselter Audi BCM2 (5. Gen) Daten sowie das Klonen von Motoren der SIMOS 18 Serie.
-
BMW Wegfahrsperren-Lösungen: Vollständige Unterstützung für CAS1/2/3/3+ und CAS4/4+ Klonen; Austausch von CAS4/4+ und FEM/BDC; Schlüsselanpassung für BMW G-Fahrgestelle; FRM-Modul-Reparatur; Getriebemodus-Rücksetzung (Erase) und Motortausch.
-
Mercedes-Benz Lösungen: Unterstützung für FBS3 zum Löschen, Ersetzen und Klonen von Lenkradschlössern (ELV), Zündschlössern (EIS), Motoren, Getrieben und Wählhebelmodulen. Unterstützt FBS4 Motor- und Getriebeklonen, einschließlich DSM/FDCT/VGS4NAG2/VGSNAG3 durch kontaktlose Rücksetzung (ohne Öffnen des Gehäuses) und Personalisierung.
-
Porsche Lösungen: Unterstützung für Schlüsselanpassung (2011–2017), Klonen von Front- und Heck-Steuergeräten, Klonen aller Motor-/Getriebetypen sowie Batterie-Instandsetzung.
-
Datenvalidierung: Unterstützt die Datenverifizierung (Checksumme) für Motorsteuergeräte verschiedenster Marken.
-
Integrierte Schlüsselprogrammierung: Integrierte Hardware zur Schlüsselprogrammierung; unterstützt die Generierung von Fernbedienungsschlüsseln sowie das Klonen von ID48/96 & ID46 Chips.
-
PC-Software-Integration: Integriertes PC-Clone-Modul für PC-basiertes ECU-Cloning mit erweiterten Klon-Funktionen und professioneller Datenüberprüfung.
Technical Preview Specifications
Professional Hardware Layout
The G5 is designed for the workshop environment, featuring a robust and intuitive interface:
| Component | Function |
| Car Key Slot | RF detection and key data reading. |
| Mercedes-Benz Key Slot | Dedicated infrared slot for FBS3/FBS4 key matching. |
| DIY Slot | For connecting ECU pins directly via cable—ideal for Bench mode. |
| EEPROM Slot & Latch | Securely read and write IC chips without soldering errors. |
| PC Clone Module | Integrated for high-speed data verification and advanced software cloning. |
Coming Soon: Are You Ready to Upgrade?
The LAUNCH X431 G5 is currently in its final pre-launch phase. For workshops that want to stay ahead of the curve in FBS4 personalization, MQB key matching, and ZF gearbox cloning, the G5 will be the definitive choice.
Stay tuned for the official release date and pre-order opportunities.
NOTE: The LAUNCH X431 G5 is not yet available for purchase; there may be some adjustments upon its official release.