2022 Volkswagen Viloran TPMS Sensor Replacement by Launch TPMS 5011 V2

Learn how to replace a faulty tire pressure sensor on a 2022 Volkswagen Viloran using Launch TPMS 5011 V2 Tool.

TPMS 5011 V2= TPMS 511S V2
Both support the same functions, 5011 V2 is the e-commerce version.

What You will Learn:

  • Identify the damaged sensor (in this case, the FL wheel position)
  • Program a new Launch tire pressure sensor
  • Activate and learn the new sensor
  • Complete the OBD relearn procedure
  • Verify the repair by checking the instrument panel and performing a road test if needed

 

Step-by-Step Guide:

Step 1: Select Right Menu Path
Navigate to TPMS-> Volkswagen-> Viloran-> 2022/01-2025/12 (433MHz) [30D907251]

Step 2: Identify the Damaged Sensor
Tap [Active] to activate the four tire pressure sensors
The FR, RR, and RL wheel sensors are successfully activated.
But the FL wheel sensor fails to be activated, so it is confirmed that the FL wheel sensor is damaged.

Step 3: Program Sensor ID
Click [Programming] and choose [Auto]

Note: You can also choose [Manual] to input the original vehicle sensor ID or [Copy by OBD] to copy the sensor ID.

For sensors programmed using this method, if the instrument panel does not display tire pressure values, the Mercedes learning method is still required for learning process)

Wait for the programming to complete.

Install the programmed Launch tire pressure sensor to the FL wheel and inflate the tire to the standard pressure.

Step 4: Activate Launch Sensor
Tap [Active] to activate the Launch tire pressure sensor at the FL wheel position

Click [Learning]-> [OBD Relearn].
Wait the sensor learning operation is successful

After successful learning by TPMS 5011 V2, the tire pressure light on the instrument panel will turn off.

The tire pressure value is displayed normally on many car models.

If after successful tire pressure matching, the tire pressure cannot be displayed normally or the tire pressure light does not turn off, In this situation, the vehicle needs a road test.

The test should be conducted at a speed of 30km/h or above for 15 minutes, and there should be no abnormal tire pressure warning.

The problem has been solved.